3000 series
3000 SERIES INSULATED STEEL & GLASS MODULAR WINE DOORS AND VISION LIGHTS
PART 1 – GENERAL
1.1 DESCRIPTION
Provide factory-fabricated, thermally enhanced steel and glass modular wine doors and vision lights as indicated on drawings and schedules. System to include doors, vision lights, corners, and wall posts designed for large spans, with modular pre-glazed assemblies ensuring alignment, thermal performance, and aesthetic continuity.
1.2 RELATED WORK
● Framing and structural support by others
● Installation hardware provided by manufacturer
● Adjacent finishes and wall construction
1.3 SUBMITTALS
● Product data, including door/frame/hardware specifications
● Shop drawings indicating layout, dimensions, glazing, and hardware
● Samples of finishes and hardware
PART 2 – PRODUCTS
2.1 MANUFACTURER
● 3000 Series – [Manufacturer Name], [City, State]
2.2 SYSTEM CONSTRUCTION
● Door Members: 2-1/2” × 1-1/2” fully welded, seamless, thermally enhanced steel
● Door Frame: Four-sided thermally broken, core-filled steel, fully weathered
● Modular Framing: 1-1/2” × 4-1/4” welded and buffed steel, factory pre-glazed
● Modular design enables integration of doors, vision lights, and corner assemblies
2.3 GLAZING
● 1” insulated low-iron tempered safety glass
● Argon-filled for enhanced thermal efficiency
2.4 HARDWARE (STANDARD)
● (3–4) 4-1/2” hydraulic self-closing hinges with hold-open feature
● 36” offset square pull handle, single side
● Jamb-mounted mortised Adams Rite dead latch/key
● Proprietary magnetic/ball-bearing catch
2.5 OPTIONAL FEATURES
● Machined, core-filled 90° corner posts
● Core-filled wall posts
PART 3 – EXECUTION
3.1 INSTALLATION
● Install modular, factory pre-glazed, pre-hung assemblies in accordance with manufacturer instructions and project requirements
● Verify plumb, level, and alignment prior to securing
● Install provided hardware and accessories
3.2 ADJUSTMENTS AND CLEANING
● Adjust doors and hardware for smooth operation and proper closure
● Clean glass, frames, and hardware per manufacturer instructions
3.3 WARRANTY
● Manufacturer’s standard warranty covering glass, frame, and hardware
● Minimum five (5) years on insulated glass performance
PART 4 – PERFORMANCE
● Thermal Efficiency: Thermally broken steel members with insulated glazing
● Durability: Fully welded steel door and frame construction
● Modularity: Pre-glazed, coordinated assemblies for large spans
● Aesthetics: Low-iron glass and precision welded steel frames for high-end appearance
Warranty
Name
Address
Insulated Steel & Glass Modular Door and Partition SystemPART 1 – GENERAL
1.01 SUMMARY
A. Furnish and install factory-fabricated insulated steel and glass modular door and partition systems as specified herein.
B. System shall include doors, framing, glazing, hardware, finishes, and accessories required for complete installation.
1.02 REFERENCES
A. ASTM E84 – Surface Burning Characteristics of Building Materials
B. ASTM E1300 – Standard Practice for Determining Load Resistance of Glass
C. ANSI Z97.1 – Safety Glazing Materials Used in Buildings
1.03 SUBMITTALS
A. Product Data: Manufacturer’s technical literature, system descriptions, profiles, finishes, and performance data.
B. Shop Drawings: Fully dimensioned elevations, sections, details, anchorage methods, hardware locations, and tolerances.
C. Samples: Powder coat finish samples, minimum 3″ x 3″.
D. Warranty Documentation.
1.04 QUALITY ASSURANCE
A. Manufacturer shall have minimum five (5) years’ experience producing thermally enhanced steel and glass door and partition systems.
B. Fabrication shall be performed in a controlled factory environment.
1.05 DELIVERY, STORAGE, AND HANDLING
A. Deliver materials in manufacturer’s original packaging, labeled and protected.
B. Store products in a clean, dry, covered location.
PART 2 – PRODUCTS
2.01 MANUFACTURER
A. Basis of Design: Wine Front Direct
B. Approved Substitutions: Subject to architect approval.
2.02 DOOR SYSTEM
A. Door Construction:
1. Profile: 1-1/2″ x 1-1/2″ thermally enhanced steel stiles and rails.
2. Fabrication: Fully welded and ground smooth.
3. Glazing: 3/4″ insulated glass units.
4. Hardware: Premium Adams Rite® hardware set including closers, latches, and pull handles as scheduled.
5. Finish: Factory-applied architectural-grade powder coat.
2.03 PARTITION FRAMING SYSTEM
A. Framing Construction:
1. Profile: 1-1/2″ x 1-1/2″ thermally enhanced / thermally broken steel framing.
2. Fabrication: Fully welded construction with concealed anchorage.
3. Glazing: 3/4″ tempered insulated glass.
4. Finish: Factory-applied architectural-grade powder coat.
2.04 GLAZING
A. Type: Insulated Glass Units (IGU)
B. Thickness: 3/4″ nominal
C. Safety Compliance: ASTM E1300 and ANSI Z97.1
D. Performance: Designed for controlled wine cellar environments
2.05 HARDWARE
A. Manufacturer: Adams Rite®
B. Finish: Coordinated to powder coat finish
C. Components: Closers, latch sets, locks, pull handles, and accessories as scheduled
2.06 FINISHES
A. Powder Coat:
1. Architectural-grade polyester powder coat.
2. Applied in a controlled factory environment.
3. Minimum thickness per AAMA standards.
PART 3 – EXECUTION
3.01 EXAMINATION
A. Verify opening dimensions, substrate conditions, and tolerances prior to fabrication.
3.02 INSTALLATION
A. Install systems plumb, level, and square in accordance with approved shop drawings and manufacturer’s instructions.
B. Provide complete perimeter sealing and anchorage.
3.03 ADJUSTING AND CLEANING
A. Adjust doors and hardware for proper operation.
B. Clean glass and exposed surfaces.
PART 4 – WARRANTY
4.01 WARRANTY COVERAGE
A. Insulated Glass: Five (5) year limited warranty against seal failure and manufacturing defects.
B. Powder Coat Finish: Ten (10) year limited warranty against fading and normal wear.
C. Framing and Door Construction: Lifetime warranty against structural frame failure.